Data Base for Seismis Rick Assessment in Mexico City
We describe a model to estimate expected ground motions and expected damage, based on intensity damage relations derived for 14 classes of buildings representative of Mexico City construction....
Empirical Prediction of Strong Ground Motion
In 1982, we published equations for the prediction of various measures of ground motion as a function of earthquake magnitude, distance from the earthquake rupture, and site geology. Many...
Seismic Condition Assessment of the San Francisco-Oakland Bay Bridge
The project summarized here was initiated at the University of California at Berkeley to study seismic behavior of the San Francisco-Oakland Bay Bridge and to develop recommendations for...
Seismic Strengthening of R/C Columns Using Steel Jackets
This paper presents experimental results on the use of steel collars and steel jackets as a retrofitting system to improve the seismic performance of short rectangular reinforced concrete...
Code Provisions for Unreinforced Masonry Bearing Wall Buildings in California
Prior to the Long Beach earthquake of 1933, unreinforced masonry (URM) construction was usual in California, as it still is in many areas of the United States. The poor performance of...
Seismic Retrofit of Building Structures with Unreinforced Masonry Infill Walls
The paper summarizes the result of an analytical study conducted by the authors concerning the evaluation of the seismic performance of buildings with unreinforced masonry infills. The...
Report and Summary of ATC-31?Evaluation of the Performance of Seismically Retrofitted Buildings
Structural and damage data for seismically retrofitted buildings affected by the October 1, 1987 Whittier Narrows and October 17, 1989 Loma Prieta, California earthquakes were collected...
Tension Pile Test
The California Department of Transportation is conducting FULL SCALE AXIAL LOAD TESTS of 34 piles. This research project/proof test is being jointly conducted by public agencies (Caltrans...
Fundamental Issues in Seismic Safety in Midwestern U.S. Due to Hazard/Vulnerability Relation
Problems in establishing and mitigating seismic risk in urban areas when seismicity is not confidently based on instrumental records are discussed. Urban Southwestern Ohio is a specific...
Seismic Standards for Existing Federally Owned and Leased Buildings
Public Law 101-614 requires the Interagency Committee on Seismic Safety in construction to develop 'standards for assessing and enhancing the seismic safety of existing buildings constructed...
A Wind Tunnel Study of an Aeroelastic Model of the Florida Suncoast Dome
Very large scale cable domes have been built using prestressed, high strength steel cable or strand, steel tube columns and a lightweight fiberglass skin. Geiger Engineers Florida Suncoast...
Seismic Strengthening of Johnstown Tank in Lakeside, California
Seismic overturning moments exerted on liquid storage tanks may be resisted by a system of anchor bolts if the shell could be adequately anchored to its base, or by allowing the base plate...
Blast-Damaged Concrete Structures in Beirut
This paper describes the effect of blasting loads on structural members. It identifies predominant structural systems in war-damaged zones of Beirut and to explain typical damage mechanisms....
Viscoelastic Dampers for Seismic Pounding Mitigation
A hysteretic model for viscoelastic (VE) damper is explained. The model accurately accounts for the effects of excitation frequency as well as temperature of the damper. Benefit of using...
Seismic Isolation Retrofit of the State of California Justice Building
The State of California Justice Building, located at 350 McAllister Street, San Francisco, is the first building to be selected by the State of California for retrofit using seismic (base)...
Evaluation of Seismic Isolation Schemes for a Historic Building
The U.S. Court of Appeals Ninth District building originally completed in 1905 with an expansion in 1933, suffered damage during the 1989 Loma Prieta earthquake. The building is currently...
Hybrid Control of Sliding Isolated Structures
The seismic response of buildings and bridges can be improved by isolating the structure with a seismic sliding bearings. Specialized passive devices are commonly used to complement these...
Seismic Strengthening for Structures in Regions of Low Seismicity
Most existing structures were not designed to today's seismic codes and standards, and in fact in low seismicity regions codes did not require seismic design until recently....
Conceptual Design of a Monitoring System for Maglev Guideways
The state-of-the-art in nondestructive testing (NDT) technology has advanced significantly over the past fifteen years and has reached a stage where continuous monitoring of structures...
Full-Scale Bridge Test to Monitor Vibrational Signatures
A full-scale highway bridge, in the process of being demolished and replaced was monitored using vibrational techniques in its in-service condition. The bottom flange and web of one fascia...
Return to search